components product information connector new 1/4 mb-0208-2 february 2012 jae pmk div. proprietary. copyright ? 2012, japan aviation electronics industry, ltd. ? no. of contacts: 8 pos.+ 2pos. (d-sw) ? contact resistance: 100m ? max. ? dielectric withstanding voltage: ac500vr.m.s. per minute ? operating temperature: -25 deg. c to +85 deg. c ? storage temperature: -10 deg. c to +60 deg. c features ST10 series microsd tm small memory card connector general specifications ? push-push structure, standard mo unting type connector for microsd tm memory cards, standardized by sda tm . ? balanced emi countermeasure through 4 hold-down points ? slim design with 1.25mm heig ht, 13.2mm width, and 14.85 mm depth (depth including card: 16.75mm) ? halogen-free product; supplie d in embossed tape for automatic mounting (compatible with second reflow) ? card insertion detection structure (d-sw), normally open ? card lock structure ? 1mm push stroke and 3.1m m card eject length ? countermeasure to prevent the card from popping out. ? rated current: 0. 5a / per pin ? rated voltage: 10v / per pin ? insulation resistance: 1,000m ? min. ? durability: 10,000 times ? card insertion force: 40 n max. rohs compliant < outline > the ST10 series are one-piece type ex ternal connectors for the micro sd tm card. they are high-density, smt, push-push, standard mounting , low profile connectors compatible with the microsd tm card, standardized by sda tm as a compact memory card for various portable devices. * microsd tm is a trademark of sd card a ssociation.
mb-0208-2 2/4 jae pmk div. proprietary. copyright ? 2012, japan aviation electronics industry, ltd. materials and finishes component materi al / finish signal contact copper alloy / contact: 0.5 ? m min. au plating over ni terminal: au flash plating over ni housing synthetic resin / no cover frame stainless steel / terminal area: au flash plating over ni eject bar synthetic resin / none, halogen-free material spring stainless steel / none d-sw contact same as signal contact lock stainless steel / none cam follower stainless steel / none ordering information ST10 s 008 v 4 b (r1800) 4: au 0.5 ? m / au flash plating v: smt mounting with hold-downs no. of contacts series connector type s: non-zif structure b: modification code reel part number (note) note) an embossed tape r eel contains 1,800 pcs. please contact us for details on embossed tape specifications.
mb-0208-2 3/4 jae pmk div. proprietary. copyright ? 2012, japan aviation electronics industry, ltd. ? gnd ? gnd detection switch card inserted without card sj112391 ST10s008v4b sj drawing part number table 1: circuit unit: mm
mb-0208-2 4/4 jae pmk div. proprietary. copyright ? 2012, japan aviation electronics industry, ltd. product marketing division aobadai building, 3-1-19, aobadai, meguro-ku, tokyo 153-8539 phone: +81-3-3780-2763 fax: +81-3-3780-2946 * the specifications in this brochure are subject to change w ithout notice. please contact jae for information. applicable board dimensions (for reference) note 1. do not apply force to this surface. note 2. vacuum area. note 3. bottom area is metal (ground) so only ground pattern and ground via hole are allowed in this area. note 4. pattern and via hole cannot be applied to th is area due to moving parts. notice: products shown in this brochure are made for the applications listed below. however, if the above-mentioned products are to be used in aerospace devices, marine cable-conne ction devices, atomic power control systems, me dical equipment for life- support systems, or any ot her specific application requiring extremely high re liability, please contact jae for further information. recommended applications : computers, office machines, measuring devices, telecommunication devices (terminals, mobi le devices), av devices, household applicati ons, fa devices, etc. unit: mm
|
